Where it goes
The cylinder stands upright under the sink beside the Fizz-X. The regulator sits on top, and a gas line runs to the yellow CO₂ port on the Fizz-X.
Taps that pour filtered boiling, chilled or sparkling water.
A toilet with an integrated bidet, heated seat and warm air dryer.
Round and rectangular basins that sit on top of the vanity.
For Alia owners. Upgrade kits, taps sold on their own, filter cartridges and CO₂.
Filtered boiling and chilled water, plus normal hot and cold, from one tap.
See all boiling & chilled water tapsFiltered boiling, chilled and sparkling water from one tap.
See all sparkling water tapsTwo-bowl stainless steel sink with a built-in cup washer and pull-out mixer.
See the Smart SinkProduct support
How to fit and store your CO₂ cylinder, set the fizz and stay safe with gas under pressure.
The cylinder stands upright under the sink beside the Fizz-X. The regulator sits on top, and a gas line runs to the yellow CO₂ port on the Fizz-X.
Drag to turn the CO₂ cylinder, and pinch or scroll to zoom in. On a phone you can also see it in your own room with the AR button.
Work in a well-ventilated area, away from heat and flames.
Take the protection cap off the new cylinder's valve.
Connect the approved pressure regulator to the valve.
Turn the black knob clockwise until the needle sits at 4 bar, the red line. Follow the instructions with your Fizz-X for anything specific to your model.
The regulator sets how much CO₂ reaches the Fizz-X. Turn the knob to choose a lighter or a stronger fizz.
Three things you may notice as the cylinder runs down.
| What you notice | Likely cause | What to do |
|---|---|---|
| Weaker fizz | Falling CO₂ pressure | Plan to swap the cylinder |
| Slower carbonation | The cylinder is running low | Swap it soon |
| No fizz at all | An empty or low-pressure cylinder | Fit a new cylinder |
Check the regulator needle is at 4 bar, the red line. If it is, the cylinder is probably empty, so fit a new one.
Gas may be escaping at a connection. Open a window or door to air the room, keep away from the cabinet and call us on (03) 9219 0189.
Don't refill it. Make sure it's empty, don't pierce or burn it, and dispose of it according to your local government requirements. The steel cylinder goes to a multi-material collection centre, and the plastic support to sorted waste collection.
Order a CO₂ cylinder for Fizz-X. Questions? Call (03) 9219 0189.
Nothing matches that search. Our team can help on (03) 9219 0189
Call or email our team. Have your model and proof of purchase handy.