Product support

Alia CO₂ Regulator for Fizz-X fitting, use and support

How to fit your CO₂ regulator, read its two gauges, set the fizz and stay safe with gas under pressure.

CO2 cylinder with regulator fitted beside the Alia under-sink sparkling unit

About your regulator

What it does

The regulator sits on top of the CO₂ cylinder under your sink. It controls how much CO₂ reaches your Fizz-X, and that sets how fizzy your sparkling water pours.

The cylinder holds CO₂ at a much higher pressure than the Fizz-X can take. The regulator lowers it to 4 bar, the red line, and holds it there.

What comes in the box

  • One Alia CO₂ regulator, with two gauges and a black knob

The CO₂ cylinder is sold separately. Order a CO₂ cylinder for Fizz-X.

What it works with

It's made for the Alia CO₂ cylinder and the Alia Fizz-X only. It doesn't fit other cylinders, sparkling water machines or soda makers.

Every Alia sparkling system is set up with a regulator, so this one is a replacement.

How to read the gauges

Each gauge answers one question.

GaugeWhat it showsWhat to do
Right-hand gaugeThe pressure going to the Fizz-XKeep the needle at 4 bar, the red line
Left-hand gaugeHow much CO₂ is left in the cylinderOrder a new cylinder when the needle nears the red zone

Fit the regulator

Step 1. Choose a ventilated spot

Open the cabinet and work with fresh air around you, away from heat and flames.

Step 2. Remove the protection cap

A new cylinder has a protection cap over its valve. Lift it off.

Step 3. Connect the regulator

Fit the regulator to the valve on top of the cylinder.

Step 4. Connect the gas line

Push the gas line into the yellow CO₂ port on the back of the Fizz-X.

Step 5. Set the pressure

Turn the black knob clockwise until the needle on the right-hand gauge sits at 4 bar, the red line.

Then pour a glass of sparkling water to check the fizz.

Using it

Set the fizz

Turn the black knob clockwise to raise the pressure, for a stronger fizz. Turn it the other way for a lighter fizz. Make small turns and taste as you go.

After each cylinder change, turn the knob until the right-hand needle sits on the red line again.

Know when the cylinder is low

Look at the left-hand gauge. When its needle reaches the red zone, the cylinder is nearly empty and it's time for a new one.

Handle it safely

  • Use it only with the Alia CO₂ cylinder and the Alia Fizz-X.
  • Never try to repair or modify the regulator, the cylinder valve or the safety relief device.
  • Keep the cylinder and the regulator away from heat, and never above 50°C.
  • Keep them out of the reach of children.

Troubleshooting

The sparkling water is flat

Check the right-hand gauge first. If it doesn't read 4 bar, turn the knob until the needle is back on the red line.

If the left-hand gauge is in the red zone, the cylinder is running low and needs changing.

There's no fizz at all

Check the regulator needle is at 4 bar, the red line. If it is, the cylinder is probably empty, so fit a new one.

I can hear gas hissing

Gas may be escaping at a connection. Open a window or door to air the room, keep away from the cabinet and call us on (03) 9219 0189.

Warranty and help

Your warranty

Your regulator is covered by Alia's 2-year warranty, like every Alia product. Keep your proof of purchase.

Never repair or modify the regulator yourself. It's unsafe and it voids your warranty. Read the full warranty policy.

Downloads

Still need help?

Call or email our team. Have your model and proof of purchase handy.